Xenon Monitors

Xenon Trap Monitor

Mounted to a Pulmonex II Xenon System, the Xenon Trap Monitor continuously monitors trap effluent during a Xenon study via an exhaust hose connection from the
exhaust port to the monitor's intake port.

The Xenon Trap Monitor includes all the hardware necessary to mount the unit directly to the Pulmonex Xenon System.

Xenon Air Monitor

• Measures airborne concentration and total dose in MPC (or other unit)
• Regulated air flow
• Alarm Set
• RS-232 Computer and/or Data Log Interface
• Optional Printer

A six foot outlet and inlet hose draw air from the area to be monitored. Airborne concentration is displayed on a digital meter and an alarm produces a red flashing light and/or audio alarm if the preset level is exceeded.

SPECIFICATIONS
Range 4 decades: 0.1 mpc (10-6 µCi/ml) to 1000 mpc (10-2 µCi/ml)
Sensitivity 0.1 mpc
Detection Gas chamber with 2” Pancake GM detector
Shielding 3/8” thick around chamber and detector (7” h x 4.5”)
Flow Rate Regulated normally set at 10 lliters/ minute
Prefilter Used to remove particulates
Case Aluminum, 11” x 11” x 11”
Display 6 digit LED
Air Pump Vane type oil-less; muffler included (6” x 6” x 6”)
Alarm Audible 200 Hz beeper; Visual red flasher set at any point on scale
Power 115V, 60 Hz
Weight Electronics 10 lb; Shielded Detector 22 lb; Pump 7 lb